(
With Christmas upon us, I was faced with a burning question..... What to give my vinyl divas who have been spoiled all year long with designer clothes, shoes and handbags. And then it came to me.....Body Chains!!!
Original conceived to be worn over bikinis and beach wear, this harness-like, multi tiered body chain is fashion's hottest holiday accessory. Now repurposed to add sparkle and drama to party wear, Brooke Danielson, editor of vogue.com, announced on her site, "Body chains are an edgy way to decorate your outfit. From delicate chains to statement pieces, it's the (best) way to spruce up the little black dress." Silver, gold, bronze or color coated, you can make them understated to peak out from under a garment, or elaborate enough for dolly to make a grand entrance! All you need is chain, jump rings, findings or bits of earrings, pendants. And don't forget the jewelry pliers (sold inexpensively at all crafts stores.)
As usual I had such a good time with this project that I couldn't stop at just three examples. I Googled to see what was out there, headed to a jewelry supply store then let my imagination take over. The end result was much prettier than I had expected. And yes, if I were 25, I would definitely make any one of these for myself!
When it comes to chain, there are many different shapes and sizes. Feel free to use a variety of different chain within the same design. The hardest part of working with this medium (for me) was dealing with very fine chain and closing the jump rings. For help with handling jump rings, JewelrySupply on YouTube offers some great advice.
Click here to see. 1. At my favorite bead/jewelry supply store in Paris, I found lots of little pressed metal charms. I put jump rings at the top and bottom loops of this charm.
2. I threaded my chain through the ring and attached jump rings on both ends and, in this case, a small claw on one end. You can also make an S ring.
3. For the moment, this resembles a simple pendant.
4. Here you can see the closure at the back.
5. At the back, you will need another bit of chain to suspend from one of the jump rings. Then take a bit of craft wire and form a figure 8.
6. At that to the end of the center back chain and add another jump ring at the bottom.
7. Since I'm draping this directly on the doll, I pinned my figure 8 at the back and the pendant in the front down to keep it from moving while I work.
8. I take the chain and drape it from the front to the back to check for length. Then double the amount and cut.
9. Thread it through the jump rings on each side of the pendant.
10. Then bring the two ends together and join together at the center jump ring on the bottom of the pendant. This allows you to adjust the drape. Because we are not using a center back closure, this means the doll will have to step into the body chain.
From front to back, this is how my chain looks.
I really love the finer chains, but just be sure you have the right size jump rings or craft wire. And I will advise that you use some sort of magnifying glass to help you along.
I love how this chain delicately crisscrosses the body. For this, I used a heavy chain around the neck (simply because it was easier to work with) and finer chains that radiate over the bust.
1. Begin with wrapping the neck with chain and cutting to fit.
2. Add your closures to each end.
3. Stretch out your necklace then plan where you will place the jump rings. You must use an even number of them.
4. Attach the finer chain from one side of the necklace and cross the body to the back
5. Attach to the last loop nearest the center back. Repeat. Then repeat on the other side.
From front to back the end result looks like this. Since it has a center back closure, getting it on and off the doll is pretty straight forward.
A statement piece adds quite a dimension to the simplest of gowns. In fact, that's the secret to dolly wearing this look well. Choose very simple garments that fall close to the body like this strapless sheath gown.
I started out with a pressed metal disk. I've circled in red where I placed the jump rings. There is one single chain up from the top. I've added an S ring. It will wrap around the neck and hook onto itself. At the bottom, a single loop of chain attaches to the jump rings on either side of the disk. Again, the doll will need to step into this chain. Here you can see, front to back how this falls around the body.
Worn over a simple black dress, the result is stunning on Jamilia.
I found black chain and a black pressed metal disk. I wanted to make something combining the spirit of Asia and punk. This look isn't for everyone, but Liu (a Kyori Sato FR doll with a NuFace body), has a tiny bust and pulls it off.
This is essentially a necklace with a disk pendant. A double chain is added to the jump rings (marked in red) at each end of the necklace in the back. Another chain (attached to a jump ring at the bottom) runs through the jump ring attached at the bottom of the disk. This wraps around the waist and attaches to itself with an S ring (marked in blue) at the back.
Here's the front and back views of this chain.
Stunning when worn black on black.
Your doll isn't as daring as Liu? Slide a shirt or jacket over the chain and button low.
The better crafts or jewelry supply stores will carry a variety of chain including some with beads or pearls. This is a simple multi-strand chain necklace. If the other chains on this page are too complicated or too much for your doll's tastes, she can still get in on the trend by wrapping a couple of strands around the shoulders to the back.
Though I found this at a jewelry supply store, earrings also make for great statement jewelry.
I bent some simple 18 gauge wire into a neck cuff, added a jump ring then attached my "earring." I threaded some fine silver wire through the jump ring and attached a claw and loop closure at either end of the chain. This drapes over the doll's bust and around the back of her waist. Simple!
This is another view from front to back.
And then we went for high drama! Meet Grace, my newest model. This striking beauty needed something extravagant. I found a silver pendant in form of a bird.
Here you can see, I've attached jump rings to the extremity of each wing as well as where the birds meet in the center. A drape of silver chain which will go over each shoulder drops from the wing tip to the center ring. I added a small length of chain with a teardrop in the center. This can be worn either in the front or at the back. Worn as a back accent, I threaded a black satin ribbon which ties in the front at the throat. But when worn over the front of a black top, this chain is attached to my silver wire choker.
Wishing you, your families and your doll families a
Very Happy and Most Stylish Holiday!!!!
from April and her "models"
Follow us on Twitter: @FashDollStylist
All text and photos property of Fashion Doll Stylist.
